Menges Roller Company wins 2013 AIMCAL Award for Technical Excellence
The “Hybrid Chill Roll” was designed by the Menges Roller (www.mengesroller.com) Engineering Team to overcome inner chamber concerns seen in typical chill rolls (which are double-shelled and filled with a thermal transfer liquid). On a standard chill roll, the interior chamber is susceptible to oxidation (rusting), scaling (mineral deposits), and corrosion. This is because, with a traditional design, steel is used on the inner surface of the outer shell, the outer surface of the inner shell, and on the attached spiral wrap. When this material breaks down inside the roller, it leads to loss of thermal transfer performance (the roll doesn’t get as hot/cold as it should), and poor-quality output for the converter.
But Menges Roller is using today’s high-tech materials to dramatically increase chill roll lifespan & performance. With Menges Roller’s new design, the outer surface of the inner shell receives a thick coating of a high-grade, proprietary elastomer – and the spiral baffle flutes (which help circulate the thermal fluid) are then machined from this elastomer coat. Next, the interior wall of the outer shell receives a heavy application of an oxidation and corrosion-resistant metallic compound. Now the entire interior chamber is protected from the damaging effects generated by the most popular thermal transfer fluids; glycol, oil, and water with improper pH levels.